Training Site: Construction & OSHA
OSHA 30 Construction (Self-Paced Online)
30 contact hours · osha.gov/training/outreach · 60 questions
OSHA-compliant training led by an OSHA-Authorized Outreach Trainer
Official safety documentation (certificate & wallet card) accepted by general contractors, project managers, insurers and auditors.
Site-ready documentation
Instant signed certificate and QR wallet card verifying training under OSHA 29 CFR 1926 / 1910.
Authorized instruction
Developed and overseen by Tyler D., OSHA-Authorized Outreach Trainer (OSHA 500 & 501) and MSHA-approved instructor.
Instant verification
Site supers and safety managers scan the card's QR code with any phone camera to verify it in seconds.
What you'll practice
- Build verifiable safety instructions and corrective-action plans for multiple crews working around shared hazards.
- Review Focus Four controls, fall systems, electrical exposures, lifting, excavation and scaffold scenarios.
- Analyze PPE fit, dust/noise, concrete exposure, steel stability, hot work, confined spaces, utilities and strain risks.
- Coordinate an integrated pipe-installation plan involving trench entry, crane delivery, cutting, compaction, a utility vault and changing conditions.
What the final exam covers
60 multiple-choice questions
- Focus Four hazard controls, fall arrest, electrical protection, spotters, lifting and stored energy.
- PPE fit, chemical/dust/noise exposures, heat emergencies, ladders, excavation access and material stability.
- Corrective-action records, near-miss investigation, route changes and shared-contractor coordination.
- Concrete/formwork, rebar, steel erection, hot work/fire watch, confined-space rescue, utility uncertainty and ergonomic controls; Outreach-attendance limits.
What this course includes
- 22 modules
- 886 lesson sections
- 100 applied missions
- 60 final exam questions
72 practice questions across module quizzes
- 1. Introduction to OSHA (60 min)51 sections · 3 key points · 4 missions · 3 questions
- 2. Managing safety and health (120 min)52 sections · 3 key points · 7 missions · 9 questions
- 3. Focus Four: Falls (180 min)60 sections · 3 key points · 7 missions · 3 questions
- 4. Focus Four: Electrocution (60 min)33 sections · 3 key points · 4 missions · 3 questions
- 5. Focus Four: Struck-by (60 min)16 sections · 3 key points · 3 missions · 3 questions
- 6. Focus Four: Caught-in/between (60 min)49 sections · 3 key points · 4 missions · 3 questions
- 7. PPE (120 min)50 sections · 3 key points · 7 missions · 3 questions
- 8. Health hazards (120 min)47 sections · 3 key points · 7 missions · 3 questions
- 9. Stairs and ladders (60 min)31 sections · 3 key points · 4 missions · 3 questions
- 10. Cranes and lifting systems (120 min)32 sections · 3 key points · 6 missions · 3 questions
- 11. Excavations (120 min)44 sections · 3 key points · 6 missions · 3 questions
- 12. Scaffolds (120 min)31 sections · 3 key points · 4 missions · 3 questions
- 13. Hand and power tools (60 min)33 sections · 3 key points · 4 missions · 3 questions
- 14. Materials handling (60 min)32 sections · 3 key points · 4 missions · 3 questions
- 15. Concrete and masonry (60 min) — supplemental, not counted in the 30 hours36 sections · 3 key points · 4 missions · 3 questions
- 16. Steel erection (60 min)36 sections · 3 key points · 4 missions · 3 questions
- 17. Fire protection and prevention (60 min)36 sections · 3 key points · 4 missions · 3 questions
- 18. Permit-required confined spaces (90 min)38 sections · 3 key points · 4 missions · 3 questions
- 19. Traffic and equipment (60 min) — supplemental, not counted in the 30 hours37 sections · 3 key points · 4 missions · 3 questions
- 20. Underground utilities (60 min) — supplemental, not counted in the 30 hours38 sections · 3 key points · 4 missions · 3 questions
- 21. Ergonomics (60 min) — supplemental, not counted in the 30 hours35 sections · 3 key points · 4 missions · 3 questions
- 22. Final assessment & course closeout (30 min)69 sections · 0 key points · 1 missions · 3 questions
Materials · Materiales
- 22 lessons with key points — open in the Training Center
- osha.gov/training/outreach
This course has no additional documents or downloadable files.
Pass and you receive official safety-training documentation: a signed, dated, QR-verifiable certificate and wallet card issued by an OSHA-Authorized Outreach Trainer — accepted by employers, contractors, insurers and auditors as proof of training. (The DOL OSHA 10/30 card is issued in our instructor-led classes.)
